Spare
We carry a full range of genuine spare parts for your drone, no matter which company or model of drone you have. We got a spare for it. See our entire range below
Phantom 1battery
- HP 2200mAh 3S 11.1V 20C LiPo battery is ready to use in the Phantom
- Will also work with any other aircraft calling for a LiPo battery with the same specs
- Will charge with the stock charger that comes with the Phantom – no adapters needed
- Equipped with XT-60 connector on main power leads
- Balancing leads and connectors are compatible with most balancers and balancing chargers
- Capable of maximum continuous discharge rates up to 20C
Phantom 2 battery
- 5200mAh Lithium-Polymer
- Up to 25 Minutes Flying Time
- Integrated Power Management
- Slot-In Design
phantom 3 battery
- 4480mAh Lithium-Ion Polymer (LiPo)
- Up to 23 Minutes Flying Time
- Integrated Power Management
- Slot-In Design
- Four LEDs Show Remaining Capacity
- Specifically for Phantom 3
phantom 4 battery
- Up to 25 Minutes of Flight Time
- Intelligent Communication
- Calculates Remaining Flight Time
- Advanced Minimum Capacity Warning
- Overcharge/Over-Drain Protection
- Auto-Discharge for Long-Term Storage
- Battery capacity 5350 mAh
Phantom 4 pro/pro+ battery
- Up to 25 Minutes of Flight Time
- Intelligent Communication
- Calculates Remaining Flight Time
- Advanced Minimum Capacity Warning
- Overcharge/Over-Drain Protection
- Auto-Discharge for Long-Term Storage
- Battery capacity 5870 mAh
Phantom 4 RTK/pro v2/multispectral/advanced battery
- Up to 25 Minutes of Flight Time
- LIPO 4S battery type
- Battery capacity 5870 mAh
- Maximum power charging (160W)
DJI Mavic air battery
- Battery capacity: 2375 mAh
- Max charging voltage: 13.2V
- Battery Type: Lipo 3S
- Maximum charging power: 60W
- Flight time: 30 Minutes
DJI Mavic air 2/2S battery
- Flight time: Up to 34 minutes
- Battery Type: LIPO 4S
- Capacity: 3500 mAh 40.42 Wh
- Battery Voltage: Rated voltage (11.55V) and Limited charge Voltage (13.2V)
DJI mavic pro battery
- Battery capacity: 3830 mAh
- Battery voltage: 11.4V
- Battery type: LIPO 3S
- Overall fight time: 21 minutes
- Energy: 43.6 Wh
DJI mavic pro 2 battery
- Battery capacity: 3850 mAh
- Rated voltage: 15.4V
- Charge voltage: 17.6V
- Battery type: LIPO 4S
- Energy: 59.29Wh
- Flight time: Up to 31 minutes
DJI MAVIC MINI BATTERY
- Battery capacity: 2400 mAh
- Rated voltage: 7.2V
- Charge voltage: 8.4V
- Maximum charging Power: 24W
- Flight time: Up to 30 minutes
DJI mavic mini 2 battery
- Battery capacity: 2250 mAh
- Battery type: LIPO 2S
- Rated Voltage: 7.7 V
- Charging voltage limit: 8.8 V
- Flight Time: Up to 31 minutes
- Max Charging Power: 29 W
DJI Inspire battery
- Battery capacity: 4500 mAh
- Voltage: 22.2 V
- Battery type: LIPO 6S
- Flight time: 27 minutes
- Maximum charging power: 180 W
DJI Inspire 2 battery
Battery capacity: 4280 mAh
Voltage: 22.8 V
Battery type: LIPO 6S
Flight time: 27 minutes
Maximum charging power: 180 W
Tattu 10000 mAh Battery
Capacity(mAh): 10000
Voltage(V): 22.2
Discharge Rate (C): 20
Max Burst discharge Rate (C): 40
Configuration: 6S1P
Net Weight(±20g): 1200
Connector Type: EC5
Wire Gauge: AWG10#
Wire Length(mm): 100
Balancer Connector Type: JST-XHR
Tattu 22000 mAh Battery
- Minimum Capacity: 22000mah
- Configuration: 6S1P / 22.2V / 6 Cells
- Discharge Rate: 25C
- Max Burst Discharge Rate: 50C
- Net Weight(±20g): 2490g
- Balancer Connector Type:JST-XHR
DJI 2212 920KV Brushless Motor
DC Motor for Drone with Black Cap (CW Motor Rotation)
- Motor KV: 920 RPM/V.
- Motor Rotation: CW.
- Thrust: Around 0.5 kg
- LiPO Batteries: 3S-4S
- ESC: 30 A
- Shaft Diameter: 6 mm
A2212 10T 1400KV Brushless Motor
This comes with soldered connector
- Model: A2212/10T.
- Motor KV: 1400.
- Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
Hexa-Rotor Frame Combo Kit
ZD 850mm Full Carbon Fiber 850mm Hexa-Rotor Frame Combo Kit
- All in one Kit to built DIY Hexacopter
- Carbon fiber Arms Can Withstand 5 ° Upturn Force
- Large 20mm Carbon Fiber Tube
- Aluminium Alloy Folding Pieces
- Nylon Mixed Carbon Pipe Clamp
- All original Electronics Accessories
F550 Hexa-Copter Frame
It includes Frame, Landing Gears and Integrated PCB Kit
- Model: F550.
- Frame Weight: 620gm(including landing gear).
- Moter Mounting Hole Dia.: 3 mm
- Landing Gear Material: ABS
- Arm Size: 220 x 55 mm.
- Landing Gear Length: 200mm
- Takeoff weight: 1200-2400 grams
DJI Naza M Lite Multi-Rotor Flight Controller
It is a multi rotor flight controller
- Input Voltage (V): MC: 4.8V~5.5V (recommended 2S~6S Lipoly).
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V).
- Operating Temperature:-10°C ~ +50°C.
- Supported ESC Output: 400Hz refresh frequency
Pixhawk 2.4.8 Basic Flight Controller
- 1 x Pixhawk V2.4.8 Flight board with Original Shell.
- 3 x Connecting Cables
- 1 x Buzzer Module
- 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
- 1x NEO-M8N GPS Module with translucent Shell.
- 1 x GPS Folding Base Antenna set.
- 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module
Radiolink Mini Pix Flight Controller
- PWM Input:6
- This is Flying Tower with a mini size.
- The LAN low-loss circuit design has the ability to capture weak signals
Flysky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver
- Transmitter: FS-i6X (6 Channels)
- Receiver: FS-iA10B (10 Channels)
- RF Range: 2.408-2.475 GHz.
- RF Power : < 20 dBm.
- RF Channel: 135.
- Bandwidth: 500 kHz.
- Total Weight: 392 gm.
- Power: 6V DC 1.5A.
Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 10CH Receiver
- FS-i6S Transmitter:No. of Channel: 10Frequency Range: 2.4055 – 2.475GHzBand Width: 500KHzBand Number: 140
Transmitting Power: <20dbm
2.4G Mode: AFHDS 2A
Modulation System: GFSK
- FS-iA10B Receiver:No. of Channel: 10Frequency Range: 2.4055 – 2.475GHzBand Number: 140Receiver Sensitivity: -105dbm
2.4G Mode: AFHDS 2A
Modulation System: GFSK
(ESC) Drone Speed Controller
- Model: Emax BLHeli Series Oneshot
- Burst Current: 40A (up to 10Sec)
- Input Voltage(V): upto 16V
- Constant Current: 30A.
- BEC: 5V /2A
- Suitable Batteries: 2 ~ 4S
Emax SimonK Series Multirotor 30A Brushless ESC (Original)
- Model: Emax SimonK Series
- LiPo Battery Input: 2 ~ 3S
- Continuous Current: 30A
- Burst Current(10S): 40A (for 10Sec)
- BEC Mode: Linear
- BEC Output: 1A/5V
ReadytoSky 40A 2-4S ESC for Drone
- 40A OPTO 2-4S Brushless ESC
- The applicable number of battery cells:2-4S
- BEC output: 5V 3A
- Use for F450 450mm S500 ZD550 RC Helicopter Quadcopter
- Highly intelligent, adaptive ability, extremely easy to use
Hobbywing X-Rotor 40A ESC
- Transient current: 60A
- Continuous current: 40A
- BEC: NO
- Battery pack: 2-6S
- Weight: 26g
- Dimension: 68*25*2.7mm
- Application: wheelbase 550-650mm multirotor
1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera
- Item Name: 1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera
- Power Consumption: 55mA@ 5v
- Format: NTSC/PAL(Free switch)
- Lens: 2.8mm IR coated FOV: 110 °
- With lens cover, well protecting the lens
- With WRD function in the default
1/3″ CMOS 1500TVL Mini FPV Camera 2.1mm Lens PAL / NTSC With OSD
- Lens:2.1mm
- Min illumination:0.001Lux/1.2F
- Power: DC 5V-30V
- Electronic Shutter Speed: PAL
- Horizontal Resolution:1500TVL
- Day/Night: Auto/Color/B*W
- Signal System: PAL/NTSC (OSD Internal adjustable)
RunCam Nano 3 800TVL Camera
- World’s lightest super WDR FPV camera
- Horizontal Resolution: 800TVL
- Image Sensor: 1/3″ CMOS
- Lens: 2.1mm(M8) FOV 160°
- Power: DC 3.3-5V
- S/N Ratio: >50dB
OUR JOURNEY
Hind Innovations Founder launched the company when he imagined the potential that Drones as an alternate solution to the aerial cinematography. Initially a website selling spare parts for UAV’s. Customers were early adopters that already interested in drones
This company hired the employees whom had the excellent knowledge and experience about UAV’s
Sales strategy of the company focused on professionals and construction. The drone market grew steadily in the consumer, commercial and military sectors